The 316 Standard Wheel features a rugged 10 window design, flat snap on center cap, and debossed METHOD logo on one of the spokes.
With a strong 2,650 lbs. load rating and a lower price point, this wheel offers the best bang for your buck.
316 | Matte Black
- Solid A356 aluminum with T6 heat treatment construction
- 10 window design with debossed METHOD logo
- Snap in center cap with embossed METHOD logo
- Additional snap-in center caps available
- Hub centric fitments for common applications
- Industry’s best lifetime structural warranty
- Strong 2650 lbs. load rating
Wheel Diameter 17", 18" Wheel Width 8", 8.5", 9" Bolt Pattern 5x127, 5x150, 6x120, 6x135,
6x139.7
Offset 0mm, 18mm, 25mm
Hub Bore 110.5mm, 106.25 Wheel Weight 25.65-27.90lbs Max Load 2650lbs Wheels require regular care to maintain their factory appearance. Clean them regularly. Please note that warranty claims on finish will be voided if improper maintenance or improper cleaning agents are used.
Typical road dirt traps moisture that, over a period of time, can cause corrosion. Brake dust, created by braking friction, is corrosive and can cause pitting of the wheel’s finish. Most household cleaning agents are too harsh and must be avoided. Car wash soap and water is all you need to properly clean your wheels.
Care for the finish of your wheels the way you would care for the finish of your car. Do not use abrasive materials to clean wheels as they can damage the finish.
Use caution when cleaning tires with a bristle brush and never use scouring pads. Use caution in automatic car washes because steam cleaners and strong chemicals that are
sometimes used can cause permanent staining or corrosion.Never clean wheels when they are hot. Always allow wheels time to cool before cleaning with soap and water. Never spray cold water on extremely hot wheels.
Clear Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.
Painted and Clear-Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.
Machined and Clear-Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.
PVD Coated - Clean a PVD finish using mild dish soap and water; dry with a soft cloth.
Polished Aluminum - Clean a polished aluminum finish using mild dish soap and water; dry with a soft cloth. The appearance of polished wheels (that are not clear coated) will diminish over time unless they receive additional care and maintenance.
After cleaning, apply a coat of soft, non-abrasive cream wax or wheel seal. A specially formulated custom wheel polish and wheel seal is recommended to return shine to oxidized wheels. The finish on polished aluminum wheels is not covered under any warranty.