The Dana 35 Radius arms and Pivot Boxes work with the 4WD Ford Ranger, Explorer, and Bronco ii. The Radius Arms and Pivot Boxes compliment all Cut & Turned Dana 35 TTB Beams and are part of the Mid-Travel and Long Travel Dana 35 Suspension Kits.
We built our Radius Arms for maximum strength, durability, and articulation. This is achieved by using 1 3/4” x .120 DOM seamless tubing, 1/4″ 1020CR steel plating, and massive 1 1/4” heim joints. The horizontal tubes on these Radius Arms run on different planes to create a triangulation. Thus adding a resistance to bending compared to other Radius Arms. Our Radius Arms allow the front wheels travel on a larger arc. Meaning that you will notice a smoother ride when going over the rough terrain.
Expect 12” of wheel travel in 4WD with our Dana 35 Mid-Travel Suspension Kit and up to 19” of usable wheel travel with our 4″ or 6″ over Long-Travel Suspension Kit, depending on tire size and other factors.
The factory frame hole is utilized for the Pivot Box placement and no welding is required during installation.
Comes with all Grade 8 hardware and 17-4 stainless steel spacers.
Dana 35 Radius Arms / 86-97 Ranger 91-94 Explorer
- Ford Ranger 1986-1997
- Ford Explorer 1991-1994