Rocky Road Toyota 4Runner Rock Sliders are the creme' de la creme' of the rocker protection world. We use 3/16" inner hitch steel to make sure your bars do NOT bend! Anything other than hitch steel is just plain flimsy.

 

We use thick inner hitch steel to make sure your bars do NOT bend! Anything else is just plain flimsy. Most other 4Runner Rock Sliders are made from thin 1/8" wall tube material. Alot of shops refer to these as Nerf bars. an appropriate name since they will ofer about as much protection to your vehicle as a Nerf toy product would.

 

Our Toyota 4Runner Rock Sliders have a very sleek rounded look about them as we use genuine inner hitch steel in their construction. Hitch steel is not only very strong, it also has a nice radius corner instead of a hard boxy look. Inner hitch steel is the stuff you use to plug into 2" receiver hitches. Its sheer weight is astronomical as is its bending strength. Our shop press only goes to 40 tons and we can't even start to bend them.

 

Why hitch steel?


Why not go with a lesser gauge steel to save production costs?

 

Because we wouldn't trust anything less to protect our vehicles and neither should you! Besides, since these carry the Rocky Road **lifetime guarantee**, we don't want to have to replace them for you for free every couple years or so. We made them indestructible so they'll last forever and they are guaranteed forever, NEVER to bend on you!

 

Our 4Runner Rock Sliders are very simple to install and are completely 'bolt on'. Rocky Road rock slider kits can be installed by anyone at home. No vehicle cutting or modification is needed. Instructions outline the simple bolt on process for installation. Save money doing it yourself and you'll be shocked at the short installation time!

 

You'll find the 4Runner Rock Sliders are very attractive and will blend in nicely with your stock flares and moldings as pictured to the right. They run fender to fender and many folks have commented on their very OEM (factory) look. They tuck tighter to the body than any other rocker on the market as well.

 

Notice the close up picture of a Rocky Road rock slider kit. See the beveled edge? The nice 45* ramp which would slide up and over any rock or stump on the trail? Its takes more time and effort to manufacture the kits this way, but that's all included with the Rocky Road kits.

 

Rocky Road kits tuck up tight! Non Trail Edition kits do NOT require any plastic cutting like our competition's kit do!

 

These two points are easily observed engineering advantages the Rocky Road kit offers... but there are many more.

 

Rocky Road Supersliders.

These rocker bars offer all the strength and warranty of our regular 4Runner Rock Sliders, but with the added bonus of an additional upper tube. This upper tube can provide even more protection against sliding into rocks, trees, or other trail hazards.

 

They also make an excellent step for access to roof racks and such.

Each Super Slider kit mounts identical to the standard Rockrail for the vehicle. It also still features that great looking 45* front and rear edge. Not only good for looks, but alot more practical for trail use than our competition's squared off ends.

This is basically the same proven design as our world famous Rockrails, only with the extra slider tube up top.

 

The extra slider tube up top offers additional side protection on the trail and off the trail. One of our favorite uses of the Superslider is as a bash guard against other swinging doors in a parking lot. Imagine the dismay of the chump who just threw open his car door only to whack it on the solid steel of your Superslider. He just stuck a nice dent in the edge of his door, your toy still looks cherry!

 

4Runner Kicker Rock Slider kits

Same great mounting strength and overall design as our Superslider kits, but with that extra rear kick-out section in back.

 

These kits offer superior protection, amazing good looks, and as you can see in the photo at left, the rear Kicker portion also features a Diamond Plate cover for a really cool look and the kit also provides excellent access for roof racks, as well as for use as a step into your 4Runner.

 

*Please note, installation of ANY true rock slider may necessitate removal or modification of stock mudflaps, trim or running boards.

 

Our 2010+ SR5 (non-Trail Edition) Rock Sliders do NOT require any plastic cutting!

 

TRD PRO Owners, Choose Trail Edition Rock Sliders

 

Toyota 4Runner Rock Sliders & Rails; (84-14)

$399.00Price
Choose Your Set
Select Vehicle
  • PLEASE NOTE:
    - All photos are of the Rockslider, Superslider, and the Kicker Rock kits.

     

    - Kits available for 4Runner 1984-2014. If you have a model/year 4Runner different than our offerings, please contact us and we may use your truck for prototyping.

     

    - Standard Rock Sliders do not have the additional round tube bar. Our regular Rock Slider kits consist of the main 2x2 square slider tube. Same great strength, tight fit, protection, just without the additional outer tube.

 
  • Instagram - White Circle
  • YouTube - White Circle
  • facebook-logo-in-circular-button-outline
  • Pinterest - White Circle

© 2017-2019 12° NORTH INDUSTRIES