Outback

Construction	Cast
Colors	Matte Bronze, Matte Gunmetal, Matte Gunmetal
Sizes/Offsets	17" |  -10mm, 0mm, 32mm 18" |  0mm, 32mm
Load Rate	17" | 3700lbs / 1202kg
Lip Depth	17" |  0.84 - 1.05 18" |  0.85 - 1.04
Backspace	17" |  5.73"in, 5.14"in, 4.36"in 18" |  4.36"in, 5.76"in
Center Bore	17" |  71.50mm, 72.56mm, 87.10mm 18" |  71.50mm, 84.10mm, 87.10mm, 106.10mm
Lug Patterns	5x127, 5x150, 6x130, 6x135, and 6x139.7
Weight (LBS/KG)	17" |  32.05-34.17/14.50-15.49 18" |  34.17-35.05/15.49-15.89
Sensors	Yes, Accepts OE TPMS Sensors

Thank you for your purchase. We are a leading aftermarket wheel manufacturer and distributor committed to product quality and customer satisfaction.

 

Our state-of-the-art engineering, design and quality control ensure high quality wheels for your vehicle.

 

Wheels require regular care to maintain their factory appearance. Clean them regularly. Please note that warranty claims on finish will be voided if improper maintenance or improper cleaning agents are used.

 

Typical road dirt traps moisture that, over a period of time, can cause corrosion. Brake dust, created by braking friction, is corrosive and can cause pitting of the wheel’s finish. Most household cleaning agents are too harsh and must be avoided. Car wash soap and water is all you need to properly clean your wheels.

 

Care for the finish of your wheels the way you would care for the finish of your car. Do not use abrasive materials to clean wheels as they can damage the finish.

 

Use caution when cleaning tires with a bristle brush and never use scouring pads. Use caution in automatic car washes because steam cleaners and strong chemicals that are
sometimes used can cause permanent staining or corrosion.

 

Never clean wheels when they are hot. Always allow wheels time to cool before cleaning with soap and water. Never spray cold water on extremely hot wheels.

 

 

Clear Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.

 

Painted and Clear-Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.

 

Machined and Clear-Coated - Clean a clear-coated finish using mild dish soap and water; dry with a soft cloth.

 

PVD Coated - Clean a PVD finish using mild dish soap and water; dry with a soft cloth.

 

Polished Aluminum - Clean a polished aluminum finish using mild dish soap and water; dry with a soft cloth. The appearance of polished wheels (that are not clear coated) will diminish over time unless they receive additional care and maintenance.

 

After cleaning, apply a coat of soft, non-abrasive cream wax or wheel seal. A specially formulated custom wheel polish and wheel seal is recommended to return shine to oxidized wheels. The finish on polished aluminum wheels is not covered under any warranty.

With regular care and regular road conditions, Black Rhino offers a two year finish warranty on its wheels with chrome and painted finishes. Black Rhino provides a five year structural warranty for wheels it manufactures that are structurally unsound because of a manufacturing defect caused by Black Rhino that makes the wheel unfit for its ordinary purpose.

 

Damage or issues with wheels manufactured by Black Rhino that are not caused by, or the result of, a manufacturing defect by Black Rhino are not covered under the warranty. Additionally, the following are expressly excluded from the warranty:

• Black Rhino does not offer a "road hazard warranty," so any damage or issue with a wheel caused by the wheel colliding with a pothole or any other object or debris will not be covered by the warranty
• Wheels that have been used in racing are not covered by the warranty regardless of the damage or structural unsoundness; and
• Wheels mounted on vehicles with a load rating in excess of the load rating of the wheel are not covered by the warranty regardless of the damage or structural unsoundness
• Wheels that have been modified, repainted, or powder coated